Professional
Padel Court Glass
Manufacturers & Installers
You build the court.
We engineer the glass.
Rider Glass supplies precision-processed tempered glass
for professional padel court manufacturers, system companies,
installers and distributors.
Glass Built for Padel
In a padel court, the glass is more than an enclosure. It forms part of the playing surface. Panel dimensions, flatness, edge quality, hole positions and fixing details therefore matter to both court performance and installation.
STANDARD COURTS
Glass for traditional framed and pillar court systems.
SEMI-PANORAMIC & PANORAMIC COURTS
Large-format panels for systems designed to maximize player and spectator visibility.
CUSTOM COURT SYSTEMS
Glass manufactured according to customer dimensions, hole patterns, countersink details and edge requirements.
REPLACEMENT PANELS
Made-to-drawing glass for damaged panels and existing court systems.
Padel Court Glass Specifications
| Glass | Thermally Toughened Safety Glass |
| Typical Thickness | 10mm / 12mm |
| Glass Type | Clear / Extra-Clear |
| Reference Sizes | 1995 x 2995mm / 1995 x 1995mm |
| Custom Sizes | Available according to approved drawing |
| Edge Finish | Flat Polished |
| Holes | Precision Drilled |
| Countersunk Holes | Available according to drawing |
| Corner Radius | R2 / R3 / R4 / R5 |
| Heat-Soak Testing | Available on request* |
| European Standard | EN 12150-1 where specified* |
Built to Your Drawing
Different court manufacturers use different panel dimensions, hole positions and fixing systems. Rider manufactures the glass according to your approved panel drawing.
Your Drawing
Rider Processing
Finished Panel
Accuracy Before Tempering
All cutting, drilling, countersinking, edge processing and corner finishing are completed before thermal toughening.
PRECISION CUTTING
Panels processed to approved production dimensions.
FLAT POLISHED EDGES
Finished edges suitable for exposed padel court panels.
DRILLING & COUNTERSINKING
Hole patterns processed according to the court manufacturer's drawing.
CORNER FINISHING
Specified corner radii produced before tempering.
THERMAL TOUGHENING
Panels are thermally toughened to produce safety glass.
MEASUREMENT & INSPECTION
Critical processing details checked before packing.
Glass quality matters after installation.
Smooth Playing Surface
The glass forms part of the playing enclosure. Accurate processing and panel alignment help create the hard, smooth surface required by the court system.
Flatness & Visual Quality
Controlled tempering and consistent processing help support clean sightlines, good panel alignment and visual quality.
Impact Safety
Thermally toughened safety glass offers increased mechanical strength and is designed to break into relatively small fragments if fracture occurs.
Glass-to-Structure Interface
Neoprene gaskets, sleeves or other specified separation materials should be used according to the court-system designer's installation detail.
Glass quality, structural design, fixings and installation must work together as one complete court system.
Glass for Different Court Designs
STANDARD COURTS
10mm or 12mm tempered glass can be supplied according to the approved court design, with polished edges and customer-specific fixing holes.
PANORAMIC & SEMI-PANORAMIC COURTS
Large-format tempered panels with precision hole and countersink processing for court systems designed around improved visibility and reduced structural interruption.
PREMIUM VISIBILITY
Extra clear-tempered glass is available for projects where greater visual neutrality and reduced green coloration are desired.
Rider supplies the processed glass component.
Structural design, wind-load engineering, fixings and installation remain the responsibility of the court-system designer and project professionals.
Replacement Padel Court Glass
Broken panel?
Send us the existing panel dimensions, glass thickness, hole layout, countersink details, corner details and photographs or original drawing.
Rider can manufacture replacement glass according to the confirmed specification
Project Packing & Export
Padel glass can be packed and identified according to project requirements.
For multi-court programs, panels can be organised by project, court, panel type and crate number to simplify warehouse handling and installation.
Custom export packing is available according to the glass configuration and project requirements.
From Drawing to Glass
01 — SEND
Send your court drawing or panel list.
02 — REVIEW
We review dimensions, glass thickness, edge processing, holes, countersinks, corner details and project requirements.
03 — QUOTE
Rider prepares the glass specification and quotation.
04 — CONFIRM
The approved drawing and agreed technical requirements become the production reference.
Padel Court Glass Catalogue
Explore Rider's professional padel court glass specifications, processing capabilities and project supply solutions.
SEND US YOUR COURT DRAWING
- New Court Programs
- Repeat OEM Supply
- Custom Panels
- Replacement Glass
